Dual hinge actions

kebeal
Could someone please explain dual horizontal and dual vertical hinge actions, and how are these different from your basic horizontal and vertical hinge actions?

Thank you in advance.

Kevin
drewitgolf
Here is one of my favorites by Yoda:

"There are three basic Hinge Actions that control the Clubface Motion through Impact -- Horizontal, Vertical and Angled. Horizontal Hinge Action produces a Close-Only Motion of the Clubface; Vertical produces Lay-back Only Motion; and Angled produces a Simultaneous Close-and-Lay-back Motion. Each of these Hinge Actions is produced by maintaining the Flat Left Wrist perpendicular to the associated Plane of Motion through Impact.

With the Short Shots, all three Hinge Actions can be executed in a Vertical -- not Inclined -- Plane of Motion. In other words, the Clubhead can be made to move in a Vertical Plane -- it covers the Plane Line (Up and Back and Down and Forward Motion only, no In) -- while the Clubface through Impact either Closes Only (Horizontal Plane of Motion) or Lays-back Only (Vertical Plane of Motion) or simultaneously Closes and Lays-back (Angled Plane of Motion). Since the Plane of the Clubhead Line of Flight is in a Vertical Plane, only one Hinge is required; namely, the Hinge that controls the Clubface alignment.

However, to respect the Inclined Plane -- to move the Clubhead Up, Back and In -- you need a Dual Hinge arrangement. That is, you need one Hinge to control the Clubface (Vertical Hinge for Layback Only or Horizontal Hinge for Close Only) and a second Hinge to control the Clubhead's Inclined Plane of Motion -- the Clubhead Line of Flight (2-N-0).

This Inclined Plane of Clubhead Motion can also be thought of as Clubshaft Control (1-L-A). So, with the Dual Hinge arrangement, the Primary Hinge would control the Clubface and the Secondary (or Strap) Hinge would control the Clubshaft (and enable it to be lowered onto the Inclined Plane). Hence, we find the Dual Horizontal and Dual Vertical Hinge Actions Variations of 10-10-D/E. There is no Dual Angled Hinge Action because only one Hinge -- the Angled Hinge -- is required to control both the Angled Plane of Clubface Motion and the Angled Plane of the Clubshaft."
kebeal
So when people talk about a swinger using horizontal hinge action in their total motion, they are actually using dual horizontal hinge action.
Yoda
Originally Posted by kebeal
So when people talk about a swinger using horizontal hinge action in their total motion, they are actually using dual horizontal hinge action.
That's right, kebeal. It is standard practice to eliminate the word Dual when referring to Dual Horizontal Hinge Action and Dual Vertical Hinge Action. Homer Kelley himself did the same thing.

How can this be done without compromising the precision that is the birthright of The Golfing Machine?

First, other than with Putting and short Chips, anything other than a Dual Hinge arrangement would be extremely rare. In fact, due to Club design and the necessity to stand on one side of the ball or the other, Horizontal Only and Vertical Only Hinge Action are virtually impossible to accomplish except in the short Strokes.

Second, when Horizontal Only Hinge Action (10-10-A) or Vertical Only Hinge Action (10-10-C) is used in the short shots, that specific terminology becomes the differentiation.

And remember, there is no Dual Angled Hinge Action, because the Clubface and the On Plane Clubshaft utilize the same Angled Hinge.
Matt
Only 'non-dual' horizontal and vertical when the clubhead COVERS the plane line during the entire stroke...correct?
Yoda
Originally Posted by Matt
Only 'non-dual' horizontal and vertical when the clubhead COVERS the plane line during the entire stroke...correct?
That is correct, Matt.

The Clubhead Covers -- not Traces -- the selected Delivery Line with both Horizontal (Only) Hinge Action and Vertical (Only) Hinge Action. Thus, the Clubhead remains in a Vertical Plane -- not an Inclined Plane -- as the Clubface Closes Only (Horizontal Hinge Motion) or Lays Back Only (Vertical Hinge Motion).

Notice that I have used Motion as a differentiating term here. The Hinge Action as executed by the Flat Left Wrist (remaining Vertical to either the Horizontal or Vertical Plane) produces a corresponding Hinge Motion of the Clubface.
"Precision is recognizing and reconciling minute differentiations."

-- Homer Kelley (2-0)
Mathew
Originally Posted by Yoda And remember, there is no Dual Angled Hinge Action, because the Clubface and the On Plane Clubshaft utilize the same Angled Hinge.
I knows Lynn knows this but want to further elaborate.

There is no dual angled hinge action when the vertical plane of the angled hinge action directly intersects the inclined plane which is the most common usage. However as angled hinge action is anywhere between horizontal and vertical hinge action on an infinite no. of planes and only one of them being directly vertical to the inclined plane the secondary hinge pin (1-L) has to be used.

The more that the hinge action veers towards horizontal from the inclined plane 'pure' angled hinge action, the more the secondary hinge pin will lift in the backstroke and lower on the downstroke and lift again in followthrough on the model of 1-L. Conversely for vertical - lower on backstroke, raise on downstroke and lower again in followthrough...