So, the release is always 4-1-2-3.
Define the release of number 4.
6-B-4-0 THE FORTH POWER ACCUMULATOR The angle formed by the Left Arm and Left Shoulder forms the Forth Power Accumulator. It is not only an independent Power Accumulator, but its Triggering function as the Checkrein of the Right Elbow is also vastly important and it thus can be the Accumulator of the Accumulators - or Master Accumulator. Also see 2-M-4.
As Accumulator #4 it is Pivot (Body) Power supplying the initial acceleration of the Downstroke to throw the Lever Assemblies toward Impact by the Thrust of the Shoulder Turn. See 7-13. Another major contribution to Impact Power is geometric - it is the first link in the Swing Radius power train between the Club and the Feet.
Left Arm Power in any form or amount can still be considered #4 Accumulator Action. Otherwise it actually substitutes for the Pivot to introduce the circular motion required to produce Centrifugal Force.
RADIUS POWER
6-B-4-A MAXIMUM POWER is obtained by using maximum On Plane Shoulder Turn Thrust against Pressure Point #4 per 7-19, and maximum Swing Radius (6-B-0).
6-B-4-B ZERO ACCUMULATION is either no Shoulder Turn or the use of Accumulator #1 alone for actuating the Primary Lever Assembly.
6-B-4-C MAXIMUM TRIGGER DELAY is achieved by using either the Standard or Delayed Pivot (to increase the Lag of the Downstroke Shoulder Turn) with a Snap Loading Action (per 7-19-3 and 10-22-C) followed by a Snap Release (10-24-E) with a Pitch Basic Stroke (10-3-B). For Hitters the essential difference is that Loading is per 7-19-1.
Originally Posted by 12 piece bucketMore power type definition6-B-4-0 THE FORTH POWER ACCUMULATOR The angle formed by the Left Arm and Left Shoulder forms the Forth Power Accumulator. It is not only an independent Power Accumulator, but its Triggering function as the Checkrein of the Right Elbow is also vastly important and it thus can be the Accumulator of the Accumulators - or Master Accumulator. Also see 2-M-4.
Definition of #4
As Accumulator #4 it is Pivot (Body) Power supplying the initial acceleration of the Downstroke to throw the Lever Assemblies toward Impact by the Thrust of the Shoulder Turn. See 7-13. Another major contribution to Impact Power is geometric - it is the first link in the Swing Radius power train between the Club and the Feet.
Loading of #4 plus link to radius
Left Arm Power in any form or amount can still be considered #4 Accumulator Action. Otherwise it actually substitutes for the Pivot to introduce the circular motion required to produce Centrifugal Force.
More definition
RADIUS POWER
6-B-4-A MAXIMUM POWER is obtained by using maximum On Plane Shoulder Turn Thrust against Pressure Point #4 per 7-19, and maximum Swing Radius (6-B-0).
6-B-4-B ZERO ACCUMULATION is either no Shoulder Turn or the use of Accumulator #1 alone for actuating the Primary Lever Assembly.
6-B-4-C MAXIMUM TRIGGER DELAY is achieved by using either the Standard or Delayed Pivot (to increase the Lag of the Downstroke Shoulder Turn) with a Snap Loading Action (per 7-19-3 and 10-22-C) followed by a Snap Release (10-24-E) with a Pitch Basic Stroke (10-3-B). For Hitters the essential difference is that Loading is per 7-19-1.
Originally Posted by Hennybogan More power type definitionI put some comments into Bucket's stuff, but there are hard to see because the type is the same.
Is the "release" of #4 when the angle from the left arm to the left shoulder (after it is loaded to whatever amount) starts to go the other way (ie the angle opens up / left arm moves away from the shoulder), or is the release when it reaches some other condition?
Originally Posted by 12 piece bucket [indent]6-B-4-0 THE FORTH POWER ACCUMULATOR
As Accumulator #4 it is Pivot (Body) Power supplying the initial acceleration of the Downstroke to throw the Lever Assemblies toward Impact by the Thrust of the Shoulder Turn. See 7-13. Another major contribution to Impact Power is geometric - it is the first link in the Swing Radius power train between the Club and the Feet.
.[/INDEN]